6. Adımdaki Değişiklikler
Düzenleyen: David Husolo —
Düzenleme onaylandı tarafından David Husolo
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Z Axis | |
| [* black] Secure the Z stepper motors to the 2 new metal brackets with 4x M3x12 countersunk screws. | |
| [* black] Secure the Z stepper metal brackets to the frame with 4x M4x12 socket head cap screws and 4x M4 T nuts. The Z steppers can sit flush on the top of the Y 4040. | |
| [* black] Check the alignment. Make sure the stepper motor is straight in the mount. | |
| + | [* black] Mount the 2x spider couplers to the stepper motors. |
| [* black] Take your Left and Right Z MGN brackets and secure them to their MGN carriages with 8x M3x6 socket head cap screws. |