11. Adımdaki Değişiklikler
Düzenleyen: David Husolo —
Düzenleme onaylandı tarafından David Husolo
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [title] X Axis Alignment 1 |
|---|---|
| [* black] Start by tightening the 8x M3x6 socket head screws for the Z MGN sleds making sure they are straight. | |
| [* black] Tighten the 2x M3x40 socket head cap screws and the M5x8 button head screw into the 2020 extrusion. | |
| [* black] Snug the 4x M3 button head screws for the lead screw nuts. | |
| [* black] Spin the lead screws together making sure the X 2020 can travel the full Z length without binding. If everything moves smoothly snug down all the screws. |