Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Walter Galan

Düzenleme onaylandı tarafından Walter Galan

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Walk the camera cable connector out of its socket with the tip of a spudger.
+[* black] Disconnect the camera cable connector out of its socket with the tip of a spudger.
+[* icon_note] It is recommended to carefully push on both sides of the connector to "walk" it out of its socket.
[* black] Pull the camera cable parallel to the face of the I/O board toward the front edge of the Air to disconnect it from its socket.
[* icon_caution] Do not lift upward on this cable as you disconnect it, as its socket may break off the logic board.