MacBook Air 13" Mid 2013 Logic Board Assembly Replacement 4 No'lu Adım Geçmişi

4. Adımdaki Değişiklikler

Düzenleyen: Sam Goldheart — 26 Haz 2013

Düzenleme onaylandı tarafından Sam Goldheart

-	[* black] Disconnect the camera cable connector ~~out of its socket~~ with the tip of a spudger.
-	[* icon_note] ~~It is recommended to carefully push~~ on ~~both sides~~ of the connector to "walk" it out of its socket.
+	[* black] Disconnect the camera cable connector with the tip of a spudger.
+	[* icon_note] Push first on one side of the connector, then on the other side to carefully "walk" it out of its socket.
	[* black] Pull the camera cable parallel to the face of the I/O board toward the front edge of the Air to disconnect it from its socket.
	[* icon_caution] Do not lift upward on this cable as you disconnect it, as its socket may break off the logic board.