How to Replace the Back Cover Adhesive (Frame First) 4 No'lu Adım Geçmişi

4. Adımdaki Değişiklikler

Düzenleyen: Arthur Shi — 6 Eyl 2022

Düzenleme onaylandı tarafından Arthur Shi

	[title] Align the adhesive
	[* icon_caution] Be very careful with this step, as misaligning the adhesive can cause it to peek out of the phone during reassembly, leading to an improper seal.
+	[* icon_caution] The adhesive is very sticky—be careful with alignment, as you won't be able to reposition the adhesive once it sticks.
	[* black] Carefully align *the sticky side* of the adhesive over the edges of the frame.
	[* icon_note] You can use the screw holes to help line up the adhesive.
-	[* black] Press down on the perimeter of the adhesive strip to bond it to the ~~back cover~~.
+	[* black] Press down on the perimeter of the adhesive strip to bond it to the frame.