4. Adımdaki Değişiklikler
Düzenleyen: Alex Diaz-Kokaisl —
Düzenleme onaylandı tarafından Alex Diaz-Kokaisl
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* icon_note] Support your iPhone on a sturdy object before continuing. |
|---|---|
| + | [* black] Use a hair dryer to heat along the bottom edge of the iPhone. The glass should feel slightly too hot to touch. |
| + | [* icon_note] For complete instructions on how to use a hair dryer, [guide|157348|check out this guide|new_window=true]. |
| + | [* black] Wait one minute to give the adhesive a chance to release and present an opening gap. |
| + | [* black] Insert an opening pick under the rear glass when the Anti-Clamp creates a large enough gap. |
| + | [* icon_note] If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle a quarter turn. |
| + | [* icon_caution] Don't crank more than a quarter turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you. |
| + | [* black] ***Skip the next two steps.*** |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi