Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Andrew Bookholt

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] This step is only required if you have a MacBook Pro 15" Unibody Model A1286, otherwise move on to the next step.
+[* icon_note] This step is only required if you have an anti-glare display.
[* red] Remove the two 8 mm Phillips screws securing the Bluetooth/camera cable retainer to the upper case.
[* icon_note] One of the screws may remain captive in the Bluetooth/camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.
-[* black] Lift the AirPort board/cable retainer assembly out of the upper case.
+[* black] Lift the Bluetooth board/cable retainer assembly out of the upper case.