Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Clay Eickemeyer

Düzenleme onaylandı tarafından Clay Eickemeyer

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Remove the back cover
-[* black] Close the lid to the laptop and flip it over.
- [* icon_note] Keep the front edge of the laptop closest to you.
-[* black] Grab the left edge of the cover. Lift it up and hinge to the right.
- [* icon_note] Most of the ports are on the right edge of the laptop. Opening the cover from the left avoids it catching on these ports.
-[* black] Fully lift off the cover. Any additional clips will release easily at this point.
+[* black] Close the screen to the laptop and flip it over.
+[* black] Pull the left side of the back cover away from the frame and remove it.
+ [* icon_note] If your back cover is stuck to the chassis, use an opening pick to release the clips around the back cover's perimeter.