7. Adımdaki Değişiklikler
Düzenleyen: Sam Goldheart —
Düzenleme onaylandı tarafından Sam Goldheart
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Logic board remains. | |
| [* icon_reminder] When reassembling your logic board, be sure the rubber gasket is installed correctly. The nub on the gasket should mate with the hole cut into the logic board near the heat sink fins. | |
| - | [* icon_note] The rubber gasket should attach to the end of the heat sink as seen in the |
| + | [* icon_note] The rubber gasket should attach to the end of the heat sink as seen in the third picture. |