3. Adımdaki Değişiklikler
Düzenleyen: Walter Galan —
Düzenleme onaylandı tarafından Walter Galan
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
+ | [* black] Remove the following seven screws: |
---|---|
+ | [* red] Six 1.6 mm Phillips screws securing the the trackpad to the upper case. |
+ | [* orange] One 1.4 mm T5 Torx set screw from its tapped hole near the front edge of the upper case. |
+ | [* icon_reminder] During reassembly, do not over-tighten the set screw, as the button will cease to click at a certain point. Adjust the set screw until the movable side of the trackpad has minimal play. |
Resim 1
Önceki resim yok
Eklendi