Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Tito Jankowski

Düzenlenme reddedildi tarafından Taylor Dixon

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Remove the following seven screws:
+[* black] Remove the following six screws:
[* red] Six 1.6 mm Phillips screws securing the trackpad to the upper case.
- [* orange] One 1.4 mm T5 Torx set screw from its tapped hole near the front edge of the upper case.
-[* icon_reminder] During reassembly, do not over-tighten the set screw, as the button will cease to click at a certain point. Adjust the set screw until the movable side of the trackpad has minimal play.
+[* icon_reminder] During reassembly, do not over-tighten the set screw (orange), as the button will cease to click at a certain point. Adjust the set screw until the movable side of the trackpad has minimal play.