Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

2. Adımdaki Değişiklikler

Düzenleyen: Sam Goldheart

Düzenleme onaylandı tarafından Sam Goldheart

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Disconnect the camera cable connector out of its socket withwith the tip of a spudger.
[* icon_note] It is recommended to carefully pushPush first on both sidesone side of the connectorconnector, then on the other side to carefully "walk" it out of its socket.
[* black] Disconnect the camera cable connector out of its socket withwith the tip of a spudger.
[* icon_note] It is recommended to carefully pushPush first on both sidesone side of the connectorconnector, then on the other side to carefully "walk" it out of its socket.
[* black] Pull the camera cable parallel to the face of the I/O board toward the front edge of the Air to disconnect it from its socket.
[* icon_caution] Do not lift upward on this cable as you disconnect it, as its socket may break off the logic board.