| + | [* black] Spin the crankshaft one complete rotation. It should spin smoothly throughout. |
|---|
| + | [* black] Attach a dial indicator to the nose of the crankshaft to measure end play. |
|---|
| + | [* black] Use a large flathead screwdriver to carefully move the crankshaft side to side. Zero the indicator at one extreme, then take a measurement at the other extreme. |
|---|
| + | [* icon_note] Crankshaft end play should be ***0.0020-0.0098 in (0.050-0.250 mm)***. |
|---|
| + | [* icon_caution] Do not continue if the end play is out of spec. Double check that the thrust washers are installed correctly and of the correct thickness. |
|---|