5. Adımdaki Değişiklikler
Düzenleyen: Clay Eickemeyer —
Düzenleme onaylandı tarafından Clay Eickemeyer
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Insert the card strips | |
| [* black] Insert the card strips under each side of the battery connector. | |
| - | [* icon_note] If you can't slide the cards under the battery connector, use an opening pick to lift the connector enough to insert the card strips. |
| + | [* icon_note] If you can't slide the cards under the battery connector, use an opening pick to gently lift the connector to help insert the card strips. |
| + | [* icon_caution] Don't pry or lift the connector too much—it's soldered onto the logic board and may break if stressed. |
| + | [* icon_reminder] During reassembly, this is a good time to apply replacement adhesive, if you have it. [guide|118753|Follow this guide|new_window=true] to clean your screen and apply new adhesive strips. |