Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Darren Chan

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* blackicon_note] If you have already used a fuse resistor to complete the previous step, you may omit this step.
[* black] Insertorange] '''Insert and solder the [http://en.wikipedia.org/wiki/Series_and_parallel_circuits|parallel] 10 ohm 1/4 watt resistors to the F1 socket.socket.''' The resistor should be laid out on the top side of the circuit board and the leads should poke out from the underside. The orientation of the resistor does not matter.
[* icon_note] The 1/4 watt resistors shown in the picture are used to depict what parallel resistors should look like.
[* blackicon_note] If you have already used a fuse resistor to complete the previous step, you may omit this step.
[* black] Insertorange] '''Insert and solder the [http://en.wikipedia.org/wiki/Series_and_parallel_circuits|parallel] 10 ohm 1/4 watt resistors to the F1 socket.socket.''' The resistor should be laid out on the top side of the circuit board and the leads should poke out from the underside. The orientation of the resistor does not matter.
[* icon_note] The 1/4 watt resistors shown in the picture are used to depict what parallel resistors should look like.

Resim 1

Önceki resim yok

Eklendi

Resim 2

Önceki resim yok

Eklendi