Eşyalarını Tamir Et Topluluk Mağaza

18. Adımdaki Değişiklikler

Düzenleyen: Sam Goldheart —

Düzenleme onaylandı tarafından Sam Goldheart

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] With the cards inserted as shown, gently twist the cards together.
-[* icon_note] This should slowly spread the gap and separate any remaining adhesive.
-[* black] If there are any sections that stick and won't separate, stop prying and use a plastic card again to cut the adhesive.
-[* black] Lift the top of the display up from the frame.
+[* black] With the cards inserted as shown near the corners, gently twist the cards to increase the gap between display and case.
+[* black] If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the adhesive in the problem area.
+[* black] Begin to lift the top of the display up from the frame.
+[* icon_caution] The display is still attached to the iMac by data and power cables, do not attempt to separate it entirely.