Eşyalarını Tamir Et Topluluk Mağaza

2. Adımdaki Değişiklikler

Düzenleyen: Adam O'Camb —

Düzenleme onaylandı tarafından Adam O'Camb

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Unplug the left speaker cable from its socket on the logic board. Be sure to pull straight up out of the socket.
+[* black] Unplug the left speaker cable by pulling it straight up out of its socket on the logic board.
[* black] De-route the cable from the gap between the hard drive and logic board.
[* icon_note] If the gap between the hard drive and logic board is too narrow for the speaker cable, disconnect it and leave the cable in place.