Commercial 8 Quart Bowl-Lift Stand Mixer - Powertrain/Motor Replacement 8 No'lu Adım Geçmişi

8. Adımdaki Değişiklikler

Düzenleyen: PedroDaGr8 — 16 Şub 2023

Düzenleme onaylandı tarafından PedroDaGr8

	[title] Remove the motor mounting screws
-	[* ~~black~~] Using a #2 Philips screwdriver, remove the four screws (indicated in yellow, two on each side) attaching the powertrain/motor to the mixer body.
-	[* ~~black~~] Take care to support the motor as it is no longer connected to the mixer body and could damage the circuit board underneath
+	[* yellow] Using a #2 Philips screwdriver, remove the four screws (indicated in yellow, two on each side) attaching the powertrain/motor to the mixer body.
+	[* icon_caution] Take care to support the motor as it is no longer connected to the mixer body and could damage the circuit board underneath