Ana içeriğe geç

8. Adımdaki Değişiklikler

Düzenleyen: Manuel Haeussermann

Düzenleme onaylandı tarafından Manuel Haeussermann

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Insert your opening tool between the bottom right edge of the top and bottom housings.
-[* black] Slide the opening tool along the right edge and pry to release the plastic clips.
+[* black] Insert your opening tool into the seam between the two housings on the controller’s right edge.
+[* black] Slide the opening tool along the right edge and pry up intermittently to release the plastic clips.