13. Adımdaki Değişiklikler
Düzenleyen: Clay Eickemeyer —
Düzenleme onaylandı tarafından Clay Eickemeyer
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* red] Hook the bottom edge of the charging coil connector cover onto its [link|https://guide-images.cdn.ifixit.com/igi/LRHFT2co6ECh1eub.huge|slots below the connectors|new_window=true]. |
|---|---|
| - | [* black] Lay the cover over its connectors and line up the hole with its screw post in the frame. |
| + | [* red] Hook the bottom edge of the charging coil connector cover onto its [link|https://guide-images.cdn.ifixit.com/igi/LRHFT2co6ECh1eub.huge|slots below the connectors|new_window=true] and line it up with its screw post in the frame. |
| [* black] Use your tri-point Y000 driver to install the 1.0 mm screw. |