1. Adımdaki Değişiklikler
Düzenleyen: Enmanuel Mota —
Düzenleme onaylandı tarafından Enmanuel Mota
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] To remove the fans there are two screws and one connector plugged into the motherboard. | |
| - | [* red] Use a JIS #02 bit to remove the two screws securing the fan in place. |
| + | [* red] Use a JIS #02 bit to remove the two 5.1mm screws securing the fan in place. |
| [* icon_note] The most left screw is held in place by a rubber grommet so it will stay attached to the fan assembly when being removed, but the right most screw isn't held in place so make sure to keep track of it. |