Xbox Series X|S Controller (Model 1914) Back Housing Replacement 1 No'lu Adım Geçmişi

1. Adımdaki Değişiklikler

Düzenleyen: Manuel Haeussermann — 24 Nis 2023

Düzenleme onaylandı tarafından Manuel Haeussermann

	[title] Pry up the midframe assembly
-	[* black] Insert the flat end of a spudger in the gap between midframe assembly and back housing.
+	[* black] Insert the flat end of a spudger in the gap between midframe assembly and back housing near the left bumper.
	[* black] Pry up the midframe assembly to release it.
-	[* black] Repeat the procedure with the ~~top~~ right ~~recess of the upper middle edge of the back housing~~.
+	[* black] Repeat the procedure with the gap near the right bumper.