Xbox Series X|S Controller (Model 1914) Back Housing Replacement 1 No'lu Adım Geçmişi

1. Adımdaki Değişiklikler

Düzenleyen: Manuel Haeussermann — 8 May 2023

Düzenleme onaylandı tarafından Manuel Haeussermann

	[title] Pry up the midframe assembly
-	[* black] Insert the flat end of a spudger in the gap between midframe assembly and back housing near the left bumper.
-	[* black] ~~Pry up~~ the midframe assembly ~~to release it~~.
-	[* black] Repeat the procedure ~~with~~ the gap near the right bumper.
+	[* black] Insert the flat end of a spudger in the rectangular gap between the midframe assembly and back housing, near the inner edge of the left bumper.
+	[* black] Twist the spudger to release the left side of the midframe assembly from the back housing.
+	[* black] Repeat the procedure on the gap near the right bumper to completely release the midframe assembly.