Xbox Series X|S Controller (Model 1914) Back Housing Replacement 1 No'lu Adım Geçmişi

1. Adımdaki Değişiklikler

Düzenleyen: Manuel Haeussermann — 15 May 2023

Düzenleme onaylandı tarafından Manuel Haeussermann

	[title] Pry up the midframe assembly
-	[* black] Insert the flat end of a spudger in the rectangular gap between the midframe assembly and back housing, ~~near the inner edge of~~ the left bumper.
-	[* black] Twist the spudger to release ~~the left side of~~ the midframe assembly ~~from the back housing~~.
-	[* black] Repeat ~~the~~ procedure on the gap near the right bumper to completely release the midframe assembly.
+	[* black] Insert the flat end of a spudger into the rectangular gap between the midframe assembly and back housing, nearest the left bumper.
+	[* black] Twist the spudger to partially release the midframe assembly.
+	[* black] Repeat this prying procedure on the gap near the right bumper to completely release the midframe assembly.