9. Adımdaki Değişiklikler
Düzenleyen: Spencer Pennington —
Düzenleme onaylandı tarafından Spencer Pennington
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* red] Use a Phillips #00 screwdriver to remove the two 6.5 mm screws from the L1 and R1 button enclosures (one screw on each side). |
|---|---|
| + | [* red] Remove the two 6.4 mm‑long screws from the L1 and R1 button enclosures (one screw on each side). |
| + | [* icon_note] Use a [guide|93991|JIS|stepid=176809|new_window=true] J0 driver or an official iFixit Phillips PH0 driver, which is designed to be cross-compatible with JIS screws. Using a screwdriver other than an official iFixit screwdriver or a JIS screwdriver may result in [guide|13213|stripped screws|new_window=true]. |