Ana içeriğe geç

8. Adımdaki Değişiklikler

Düzenleyen: Dayton

Düzenleme onaylandı tarafından Dayton

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Use the T-handle to rotate the entire pump rod clockwise.
+[* black] Use the T-handle to rotate the entire pump rod clockwise several full turns.
[* icon_note] The foot valve is threaded and will screw into the base of the traveling valve, allowing you to pull the two valves up out of the well together.
-[* black] Keep turning until the resistance greatly increases. The foot valve should then be fully screwed into the traveling valve.
+[* black] Keep turning until the resistance greatly increases. The foot valve will provide this resistance when fully screwed into the traveling valve base.