6. Adımdaki Değişiklikler
Düzenleyen: Philip Le Riche —
Düzenleme onaylandı tarafından Philip Le Riche
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Removing the optical sensor | |
| - | [* black] |
| + | [* black] Facing the back of the drone, remove two screws retaining te optical sensor unit. |
| [* black] The optical sensor is also retained by two clips underneath it. Push it up firmlu from the bottom to release it. | |
| [* icon_caution] It's still connected by a ribbon cable. Take care not to strain it. | |
| [* black] Turn the optical sensor over, in an upwards direction, and remove two screws to release the retaining clip. | |
| [* black] With a spudger or similar tool, gently lidt a corner of the connector to disconnect it. |