Ana içeriğe geç

10. Adımdaki Değişiklikler

Düzenleyen: Philip Le Riche

Düzenleme onaylandı tarafından Philip Le Riche

Önce
Sonra
Değiştirilmemiş

Adım Satırları

+[title] Removing the GPS module
[* red] Lift off the tthe GPS U.FL antenna connectors.
[* orange] Remove a screw on either side of the GPS unit. These have very fine Phillips heads, smaller than 000. One of the heads may be covered with a black coating which should be scraped off
[* black] Remove the retainer clip which the screw on the right secured. The top of the clip is held by the board.
[* black] Lift off the connector which the clip retained. You can now remove the GPS unit.