Ana içeriğe geç

13. Adımdaki Değişiklikler

Düzenleyen: iRobot

Düzenleme onaylandı tarafından iRobot

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] Remove 2 screws, one either side of the power connector. These have very small Phillips heads.
[* orange] Disconnect the tiny connectors on the underside of the motor control board, two on each side. These power the LEDS in the arms.
-[* icon_note] On reassembly, these connectors are quite difficult to reengage since they are so small. Tweezers and a magnifying glass, or better still an eye loupe, are almost essential.
+[* icon_note] On reassembly, these connectors are quite difficult to reengage since they are so small. [product|IF145-020|Tweezers] and a magnifying glass, or better still an eye loupe, are almost essential.