16. Adımdaki Değişiklikler
Düzenleyen: Philip Le Riche —
Düzenleme onaylandı tarafından Philip Le Riche
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Arm disassembly | |
| [* red] Both the front and rear arms have covers on the bottom secured by two screws. Remove these screws. | |
| - | [* black] In the case of the front arm there is a small board next to the motor with 3 connectors. One receives LED power from the motor control board, a second connects to a LED within the arm itself, and the third is a U.FL antenna connector. |
| - | [* black] The front arms are similar except that a |
| + | [* black] In the case of the front arm there is a small board next to the motor with 3 connectors. One receives LED power from the motor control board, a second connects to a LED within the arm itself, and the third is a U.FL antenna connector. Disconnct all three if you need to transfer the board to a replacement arm. |
| + | [* black] The front arms are similar except that a somewhat larger board extends into the leg. |