8. Adımdaki Değişiklikler
Düzenleyen: Andrew Bookholt —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Removing the logic board assembly from the plastic chassis. |
|---|---|
| - | [* black] Disconnect a few cables and lift the logic board up out from the chassis. |
| + | [* black] Carefully pull the logic board away from the inner chassis. As you pull the board away, be sure not to bend the pins on the Wi-Fi and volume knob interconnect boards. |
| + | [* black] After separating the two pieces slightly, disconnect the button panel and the speaker connectors from the logic board. |
| + | [* black] Hey look, a MicroSD card! |
| + | [* blue] A row of sockets near the MicroSD socket allow the addition of a transmitter & receiver as well as providing +3V DC and ground. |
| + | [* red] A message from the designer. How cute. |