2. Adımdaki Değişiklikler
Adım Satırları
| + | [title] Remove the screws |
|---|---|
| + | [* red] There are six T8 Torque screws distributed equally along the top of the controller. These need to be unscrewed before proceeding. |
| + | [* icon_note] All screws are the same length, and may have some plastic residue along the shaft. |
| + | [* icon_note] A T8 55mm screwdriver is recommended, but a T7 or T9 can be used if necessary, being careful not to strip the screws. |
Resim 1
Önceki resim yok
Eklendi