7. Adımdaki Değişiklikler
Düzenleyen: Cody Schwartz —
Düzenleme onaylandı tarafından Cody Schwartz
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* red] Remove the one 25mm Philips head screw/8mm bolt holding the speaker in place with either the |
|---|---|
| + | [* red] Remove the one 25mm Philips head screw/8mm bolt holding the speaker in place with either the #1 Philips screwdriver or an 8mm socket. |
| [* black] With nothing holding the speaker to the door, pry the speaker away from the door with a flathead screwdriver or a trim tool. | |
| [* icon_note] The speaker mount in your car may appear different than in the photos as this is an aftermarket speaker and adapter mount pictured. | |
| [* black] Once the speaker is out of the door, you will need to disconnect the clip on the wire in the rear (similar to the window control on the arm rest.) | |
| [* icon_note] Not pictured, you are going to want to mount your speaker to the adapter that comes with your aftermarket speakers and set aside. Your speaker or adapter should have instructions on how to do this. |