Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: irvbromberg

Düzenleme onaylandı tarafından Evan Noronha

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Gently lift the glass panel perpendicular to the face of the LCD enough to clear the steel mounting pins attached along the underside of the top edge of the glass panel.
[* black] Pull the glass panel away from the lower edge of the iMac and carefully set it aside. Don't use the suction cups to carry the glass panel, because if either one loses its grip then the panel could drop and break.
[* black] After setting the glass panel down safely, release the suction cups. (If you neglect to do this and leave the suction applied while you continue, eventually the suction may crack the glass.)
[* black] Pull the glass panel away from the lower edge of the iMac and carefully set it aside. Don't use the suction cups to carry the glass panel, because if either one loses its grip then the panel could drop and break.
[* black] After setting the glass panel down safely, release the suction cups. (If you neglect to do this and leave the suction applied while you continue, eventually the suction may crack the glass.)
[* icon_reminder] During reinstallation, be sure to meticulously clean the inside of the glass panel and the face of the LCD as any dust or fingerprints trapped inside will be annoyingly visible when the machine is turned on.