Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

2. Adımdaki Değişiklikler

Düzenleyen: Phillip Takahashi

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_reminder] The camera board has a small heat sink with thermal puttypaste applied to its surface. Be sure the putty is evenly distributed on the heat sink before reinstallation.
[* icon_reminder] The camera board has a small heat sink with thermal puttypaste applied to its surface. Be sure the putty is evenly distributed on the heat sink before reinstallation.
[* black] Slightly lift the camera board out of the outer case, being careful not to disturb the aluminum tape securing the camera cable to the outer case.
[* black] Disconnect the camera cable by pulling its connector away from the socket on the camera board.