Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: iRobot

Düzenleme onaylandı tarafından iRobot

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Blow air into the USB-C port
[* icon_caution] Don't use your mouth to blow into your USB-C port, as the moisture from your breath can damage the contacts.
-[* black] Insert the tip of a dust blower, or the nozzle of compressed air, at one corner of the port.
+[* black] Insert the tip of a [product|IF145-064|dust blower], or the nozzle of compressed air, at one corner of the port.
[* icon_note] This gives room for any debris to eject out of the port.
[* black] Blow a few puffs of air into the port.
[* black] Plug in your device to check if it works and if the connector is fully seated.
[* black] If your device isn't working or seats properly, unplug it and repeat the blowing process.
[* black] If your device still doesn't work or sits properly after multiple repetitions, move to the next step.