4. Adımdaki Değişiklikler
Düzenleyen: Clay Eickemeyer —
Düzenleme onaylandı tarafından Clay Eickemeyer
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
+ | [title] Insert an opening pick |
---|---|
+ | [* black] Use a [guide|157348|hair dryer|new_window=true] or [guide|151116|heat gun|new_window=true] to heat the bottom edge of the back glass until it's hot to the touch. |
+ | [* icon_caution] Be careful not to heat the phone hotter than this—the battery is susceptible to heat damage. |
+ | [* black] Wait up to a minute for the adhesive to separate and a gap to form between the back glass and the frame. |
+ | [* icon_note] If a gap doesn't appear after one minute, apply more heat and rotate the handle a quarter turn. Let the Anti-Clamp and time do the work for you. |
+ | [* black] Insert an opening pick into the gap. |
+ | [* black] Remove the Anti-Clamp using the pull tabs on the suction cups. |
+ | [* black] ***Skip the next two steps.*** |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi