Bu Adımdaki Değişiklikler
Düzenleyen: Jossel Solis —
Düzenleme onaylandı tarafından Jossel Solis
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Remove the backing of the laptop to expose the hardware. | |
| - | [* black] This is done by unscrewing the 9mm Phillips screws holding the laptop backing in place. Use the Ifixit screw driver for this. The Ifixit screwdriver has the 'JO' bit. |
| - | [* black] Pry the backing of with the Ifixit opening tool |
| + | [* black] This is done by unscrewing the Japanese Industrial Standard (J) screws holding the laptop backing in place. Use the Ifixit screw driver for this. The Ifixit screwdriver has the 'J0' bit. |
| + | [* black] Pry the backing off with the Ifixit opening tool. |
| + | [* black] It is helpful to get an opening and carry that around the backing of the laptop. The cover should lift off easily if done correctly. |
| [* black] Locate the optical disk drive amongst the hardware. | |
| + | [* black] It is located in the upper left corner of this device. |