Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Andrew Bookholt

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Use a spudger to pry the fan connector straight up off the logic board.
- [* icon_caution] Be careful! These connectors are fragile. The wires are attached to a connector which fits tightly into a plastic socket on the motherboard. You are trying to lift on the wires and remove the connector from the socket without breaking the socket off of the motherboard.
+[* black] Use a spudger to pry the fan connector straight up and out of its socket on the logic board.
+[* icon_note] It is useful to twist the spudger axially from beneath the fan cable wires to release the connector.
+[* icon_caution] The fan socket and the fan connector can be seen in the second and third pictures. Be careful not to break the plastic fan socket off the logic board as you use your spudger to lift the fan connector straight up and out of its socket. The layout of the logic board shown in the second picture may look slightly different than your machine but the fan socket is the same.

Resim 2

Önceki resim yok

Eklendi

Resim 3

Önceki resim yok

Eklendi