Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Quentin Rodriguez

Düzenleme onaylandı tarafından Quentin Rodriguez

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Use the opening tool to separate the small plastic parts that were unscrewed in the last part.
+[* black] Insert the opening tool to separate the small plastic part from the main housing of the controller that was unscrewed in the last part.
[* black] Remove the remaining plastic cover by unclipping the tabs located next to the charging port. Detach the clips that are below the screen that are holding the plastic part in place.
[* black] Now you should be able to pull out the bottom cover piece.