3. Adımdaki Değişiklikler
Düzenleyen: Quentin Rodriguez —
Düzenleme onaylandı tarafından Quentin Rodriguez
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Remove the two 5.7 mm screws that are holding the top cover on. With a Phillips head #0 screwdriver. | |
| [* black] Remove the cable connecting the joystick to the board with a pair of tweezers. The cable is circled in picture one. There is a cable on both sides, so get both. | |
| - | [* black] Go around the top cover, undoing all clips holding the top cover on. |
| + | [* black] Go around the top cover, undoing all clips holding the top cover on. Insert the opening tool in between the top cover and the lower base of the controller. |