| - | [* black] Under the plastic cover, desolder the wires from the main board that correspond to the arm trying to be replaced, there should be six in total. |
|---|
| - | [* black] remove the arm once all wires are desoldered. |
|---|
| + | [* black] On the topside of the drone,desolder the wires from the main board that correspond to the arm trying to be replaced, there should be six in total. |
|---|
| + | [* black] Remove the arm once all wires are desoldered. |
|---|
| + | [* icon_reminder] Make note of where each wire goes on the board as the colors may not be the same across all models. |
|---|