Eşyalarını Tamir Et Topluluk Mağaza

9. Adımdaki Değişiklikler

Düzenleyen: ColynOB —

Düzenleme onaylandı tarafından ColynOB

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Under the plastic cover, desolder the wires from the main board that correspond to the arm trying to be replaced, there should be six in total.
-[* black] remove the arm once all wires are desoldered.
+[* black] On the topside of the drone,desolder the wires from the main board that correspond to the arm trying to be replaced, there should be six in total.
+[* black] Remove the arm once all wires are desoldered.
[* icon_reminder] Make note of where each wire goes on the board as the colors may not be the same across all models.