Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Kristen Gismondi

Düzenleme onaylandı tarafından Kristen Gismondi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Insert the spudger into the bottom right corner to lift upwards. Continue inserting the spudger to lift the inner sides of the black rim. Repeat on the opposite side.
+[* black] Insert an opening tool into the bottom right corner of the controller.
+[* black] Lift upwards with the opening tool.
+[* black] Continue using the opening tool to pry up the inner sides of the black rim.
+[* black] Repeat on the opposite side.