1. Adımdaki Değişiklikler
Düzenleyen: Walter Galan —
Düzenleme onaylandı tarafından Walter Galan
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* icon_caution] In this step you will disconnect the battery to help avoid shorting out any components during service. | |
| [* black] Use the flat end of a spudger to pry both short sides of the battery connector upward to disconnect it from its socket on the logic board. | |
| - | [* black] Bend the battery cable slightly away from the logic board so the connector will not accidentally contact its socket. |
| + | [* black] Bend the battery cable slightly away from the logic board so the connector will not accidentally bend back and make contact with its socket. |