10. Adımdaki Değişiklikler
Düzenleyen: Arthur Shi —
Düzenleme onaylandı tarafından Arthur Shi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Reassembly note | |
| [* icon_reminder] During reassembly, the face sensor cable can be tricky to connect. Follow these tips to connect the cable: | |
| [* black] Thread your fingers through the eyepiece trim’s eyeholes and grasp the edges of the sensor cable. | |
| [* black] Slide the sensor cable into the socket until the first set of tabs rests in the socket. This should flip the lock tab down partially. | |
| - | [* black] Use a spudger to press the lock tab down |
| + | [* black] Use a spudger to press the lock tab down towards the cable to lock it in place. |