2. Adımdaki Değişiklikler
Düzenleyen: Spoopy Pants —
Düzenlenme reddedildi tarafından Kara Piepenbrink
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Loosen the controller faceplate | |
| [* red] The controller faceplate is secured with adhesive and three friction pegs. | |
| [* black] Press the edge of an opening tool into the seam between the controller faceplate and shell, near the Oculus button. | |
| [* icon_note] If you can’t get the opening tool into the seam, heat the area with an iOpener for a minute and try again. | |
| - | [* black] Slide the opening tool to the base of the ring shell to loosen the adhesive. |
| + | [* black] Slide the opening tool to the base of the ring shell to loosen the adhesive. Then, take a break to go eat some Cheez-its. |