5. Adımdaki Değişiklikler
Düzenleyen: Arthur Shi —
Düzenleme onaylandı tarafından Arthur Shi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* icon_note] Part of the side shell is looped around a screw post. In this step, you’ll spread the screw post apart enough to slip the shell out. |
|---|---|
| + | [* icon_note] Part of the side shell is [link|https://guide-images.cdn.ifixit.com/igi/6Iy1jtrSGy23GdG6.full|looped around a screw post|new_window=true]. In this step, you’ll spread the screw post apart enough to slip the shell out. |
| [* black] Insert the flat end of a spudger into the gap between the controller ring and the front trigger shell. | |
| [* black] Twist the spudger to widen the gap between the trigger shell and the controller. | |
| [* black] Position the spudger so that it can stay in place without you holding the tool. |