3. Adımdaki Değişiklikler
Adım Satırları
| + | [* black] Now you have to cut your strip, so it can fit in that small space. Thats the tricky part. Some tricks that might help you: |
|---|---|
| + | [* black] Don't make it to long. Theres a thicker part of plasic on the right side of the hinge. So make sure your aluminium sheet is shorter than that. |
| + | [* black] Make sure, that you can get your battery in and out without problems. So don't make it too wide. |
| + | [* black] In the end take that screw and screw your new replacement in there. If you're using thicker aluminium, you might need to change that screw with a longer one. It worked for me with 0.5 mm thickness. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi