7. Adımdaki Değişiklikler
Düzenleyen: kenhtanaka —
Düzenleme onaylandı tarafından Brett Hartt
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* red] Remove three 3.1 mm Phillips screws securing the battery near the edge of the upper case. | |
| - | [* icon_reminder] When reinstalling the battery, be sure to install these three screws before proceeding to fasten the Tri-Wing screws. |
| + | [* icon_reminder] When reinstalling the battery, be sure to install these three screws before proceeding to fasten the Tri-Wing screws. Keep an eye on the keyboard ribbon cable, you may need to use the flat of the spudger to hold the ribbon cable out of the path of the battery as it swings down into place. |